LWS&I Windows and Doors
GLASS & GLAZING
The glass panes in modern windows can cover well over 90% of the light of the opening. This also applies to sliding systems. Large glazing is popular in internal and external doors and, It is important that modern glass panes not only look good, but also offer appropriate performance parameters and ensure safety. These are the most often used in the form of multifunctional glazing units.
Double Glazing
Single-chamber construction of insulated glass package with thermal insulation and thermal transmittance in a range of:
1,0 ≤ Ug ≤ 2,9 W/(m2 * K)
Triple Glazing
Dual-chamber construction of insulated glass package with thermal insulation and thermal transmittance in a range of:
0,4 ≤ Ug ≤ 0,9 W/(m2 * K)
Quadruple Glazing
Triple-chamber construction of insulated glass package with thermal insulation and thermal transmittance in a range of:
Ug = 0.7-0.3 W/(m2 * K)
Decorative glass/glazing
sandblasted glass available from the thickness of 6mm
colored glass ESG available in a wide range of RAL
Fire protection glass/glazing
high mechanical resistance through the use of toughened glass
pendulum impact resistance (according to EN 12600) 1 / B / 1
Soundproof glass/glazing
laminate made of float / thermofloat glass and acoustic foils
acoustic insulation of sound-absorbing glass units up to the value of Rw = 51 dB
Safety glass/glazing
available thicknesses of ESG (tempered glass): 4, 6, 8, 10 mm
available thickness of the VSG (laminated glass): in various configurations
Solar control glass/glazing
the possibility of limiting the amount of heat entering the interior
the possibility of limiting the amount of light entering the interior
Heating glass/glazing
heating glass EGLAS is an active glass whose task is to heat the interior
it will allow you to eliminate condensation, steam or snow
Drilled glass/glazing
these holes are most commonly used for ventilation or as doors, i.e., for a pet
insulated glass, drilling holes between 4-70mm and CNC holes over 70mm
Enameled glass/glazing
the maximum thickness of the glass is from 4 to 19 mm
the maximum weight of a single sheet can not exceed 400 kg.
- Warm glazing units consisting of up to four panes.
- As standard, we fill the glazing units with argon.
- On the inside, the glass is covered with a heat-insulating coating.
- The warmest panes on the market
Modern technologies used to create a window that allows for thermal parameters similar to well-insulated walls. As a result, glazing ceases to be a weak point of the building in terms of energy conservation, allowing for bigger windows without burdening the household budget. Even a passive house can now be a home full of natural light.
- A wealth of aesthetic options
In addition to fully transparent panes, the most commonly used solution, you can choose from a wide range of decorative glass. Sandblasted glass in various degrees of transparency and patterns, frosted glass, mass-coloured glass, and white and brown ornamental glass of varying thicknesses are available. Panes alternating between transparency and opaqueness?
- Adequate safety for household members
Safe glazing ensure that even if a window or patio door is damaged, the risk to its users is significantly reduced. There are several effective solutions available to lower the risk of glass breakage and ensure that even if it does break, the consequences of such an event are typically less serious. Tempered panes break into small pieces with blunt edges, and laminated glass tends to stop the created fragments, similar to how car windows do.
- Insulated glass units with additional functionality
Modern glzing are insulated glazing units, i.e., glass packages consisting of at least two glass panes separated by a chamber filled with gas. In addition, special coatings and films can appear on individual glass panes included in insulated glass units or between two composite glass sheets. They improve the thermal or acoustic insulation of the unit, limit the amount of heat penetrating the interior, or offer other advanced functionality useful in atypical conditions.
Glass in modern windows can cover significantly more than 90% of the opening's light. This also applies to sliding systems. Large glazings are popular in internal and external doors. Modern windows not only need to look good, but they should also offer appropriate parameters and ensure safety. These are mainly used as multifunctional insulating glazing units.